AnchorLift Anchor Puller with Buoy (No Buoy, N/A)

Price: $21.05
(as of Jun 16, 2024 03:29:55 UTC – Details)

Product Description

Save your arms, back, energy, and willpower from the strain of hand-over-hand anchor pulling.

AnchorLift

The AnchorLift Anchor Puller is designed to make raising your anchor easy. Simply start your engine and motor forward to raise your anchor.

The AnchorLift is ideal for anchoring in lakes and rivers with anchor lines that are rigged with less than 15 feet of chain. The chain will not thread through the AnchorLift body. It’s also an excellent way to easily pull up shrimp or crab pots rigged with nylon or polypropylene lines.

AnchorLift Pro

Designed for the heavy-duty user and made of anodized aluminum – like the AnchorLift, the AnchorLift Pro quickly pulls up anchors weighing up to 80 pounds when equipped with a buoy.

How does an Anchor Puller Work?

Dropping anchor

Slide the AnchorLift with buoy over your anchor line, anchor as normal, and drop AnchorLift into the water.

Departing

When ready to raise your anchor, simply motor forward around your anchor line to break your anchor free.

Ready to retrieve

Continue to motor forward to float the anchor to the surface. The AnchorLift sliding bolt will lock the anchor at the surface for easy retrieval.

Anchoring your boat with the AnchorLift system

Slide the AnchorLift over the end of the anchor line, threading the line under the bolt.Knot the anchor line near its end and fasten the line to your boat.Release the anchor by sliding the bolt to the up position, allowing the anchor line to slide through the AnchorLift.When the anchor and boat are in the desired position, toss the AnchorLift into the water.

To raise your anchor

With the AnchorLift on your anchor line, motor your boat forward around the anchor, taking care to keep the anchor line clear of the prop.Proceed slowly – at roughly 5 knots – until the anchor has released from the bottom, then increase speed slightly – 6 to 8 knots. Do not continue forward if the anchor does not break free.The Anchor line will slide through the AnchorLift and float the anchor to the surface.When the anchor reaches the surface, shift into neutral and pull in the slack anchor line.

AnchorLift Disclaimer

Always operate vessel in accordance with Coast Guard and other applicable regulations and guidelines.Use extreme caution when anchoring in moving water and when letting out and retrieving the anchor line.Always keep your anchor line free of tangles and away from the propeller.Do not use where loss of property or safety may be at risk.

Add to Cart

Add to Cart

Customer Reviews

4.4 out of 5 stars
137

—

4.6 out of 5 stars
356

Price

$21.05$21.05
— $80.62$80.62

Material
Nylon Aluminum 1/4″ (or 5/16″) Stainless Steel

Maximum anchor weight
80 lbs 80 lbs 80 lbs

Locks anchor in place at surface

✓

✓

Accommodates chains over 15 feet

✓

Recommended use
Lakes and reservoirs Lakes and rivers Saltwater

FLOAT YOUR ANCHOR OR CRAB TRAP TO THE SURFACE – The AnchorLift Anchor Puller easily floats anchors, crab traps, and lobster pots up to 80 lbs.
EASY-TO-USE ANCHOR RETRIEVAL SYSTEM – Slide the AnchorLift over the anchor line, tie off to a cleat and let the anchor out by holding the sliding bolt in the up position. When anchored toss the AnchorLift with buoy into the water. To raise your anchor motor your boat forward to float the anchor to the surface.
IDEAL FOR ANCHORING IN RIVERS AND LAKES – Use in place of a winch or windlass. Sliding stainless steel bolt grabs line and locks anchor at water’s surface. Designed for use with anchor lines 3/8″ to 5/8″ in diameter.
QUALITY CONSTRUCTION – Made from marine grade nylon with stainless steel at all wear points. For extra heavy-duty use, consider our anodized aluminum AnchorLift Pro model. (Link in description below).
MADE IN THE USA – The AnchorLift Anchor Puller and Polyform buoy are made in the USA and backed by a limited lifetime warranty.