Digital Boat Depth Finder, Depth Sounder Waterproof Dash Depth Finder Transducer With White Backlight For Yachts Boats Marine

Price: $135.99
(as of Jun 20, 2024 10:21:30 UTC – Details)

Spec:
Item Type: Depth Sounder
Material: Stainless steel 316L, anti fog glass, ABS
Mounting Hole Diameter: Approx. Φ52mm/2in
Depth Indication Range: 0-100m/0-328FT
Backlight Color: White
Operating Voltage: DC 12V
Instantaneous Voltage: DC 9-32V, up to 16v
Operating Current: 60mA
Operating Temperature: -30 °C- + 75 °C
Storage Temperature: -40 °C – + 85 °C
Dial Waterproof Rating: IP67
Back Cover Waterproof Rating: IP5

How to Use:
Step 1: Open a 52mm diameter circular hole in your center control or other pre installed position
Step 2: Put the instrument into the open round hole
Step 3: Correspond the bracket screw hole to the screw on the back of the instrument, then tighten it with the screw and clamp the panel with the bracket and the watch frame
Step 4: Plug the power harness directly into the back terminal of the instrument, and then connect the corresponding sensor and wiring harness according to the distribution instructions to connect the power
Wiring Method: Red wiring is connected to the positive electrode of the power supply, orange wiring is connected to the backlight, and blue wiring is connected to the negative electrode of the power

packing list:
1 x Depth Sounder
1 x Transducer (with 10m cable)
2 x Screw
1 x Power Cord
1 x Manual

Practical: The Digital Boat Depth Finder working voltage is 9‑32V, up to 16V, low power consumption, long life, high accuracy, short start up time, the highest depth indication of 100m, you can instantly know the depth of the water.
Mode: Press keypad Mode to switch SH, DP, KL, UN function. Used to turn on or off the monitor. Short press to set the value required, and keep the digital increasing or decreasing fluently.
Function: This device is work with 12V system only, to indicate the depth appointed. Normally, the buzzer beeps once when it was connected correctly then turn on the power.
Application: Boat depth finder easy to install, good durability, impact resistant, flexible and easy operation, suitable for yachts, small and medium sized boats, fishing boats and other types of marine transportation.
Material: Made of stainless steel 316L bezel and anti fog glass, it has excellent anti fog and waterproof properties, and can be used for a long time even in cold sea environments.